Inversys Plus 11-37 Compressors (10-20 BAR)

Thanks to high-quality equipment and advanced engineering solutions, they provide efficient and flexible use according to the needs of your industrial production.

Advantages.

• The first product in its class to take up the least amount of space.
• Saves up to 55% of energy*.
• It operates at a constant outlet pressure.
• It has a wide range of working pressure (16-20 bar)**.
• Ensures efficient and energy-efficient compressed air production even when compressed air demand fluctuates significantly.
• Long component life due to soft start.
• It has a function of protection against the adverse effects of peak currents.

* Compared to compressors without an inverter for applications with variable requirements.

** On request, specially made to meet your needs.

General characteristics

• IPM electric motor of high efficiency class IE5.
• Low noise operation.
• Soft start with variable power transfer rate.
• Option to install a dehumidifier and receiver (up to 22 kW).
• Option of integrated dehumidifier and heat recovery (18 kW and above).

Screw block

• Zero transmission losses thanks to compact direct power transmission.
• High performance even at low speeds.
• New rotor profiles to reduce losses in air production.
• New generation bearing design to improve load-bearing capacity.
• Thanks to the low rotor speed, it has a long service life.

Electric motor

• The IE5 Ultra Premium motor with an internal permanent magnet (IPM) with high energy efficiency.
• Compact design.
• Low noise level.
• Class F insulation.
• Optimal oil cooling at all speeds for high efficiency.
• Lubrication-free motor bearings.

Heat recovery options for even greater savings

A large amount of heat is generated in the compressor during air compression. Much of the heat is recovered by means of a suitable oil-water heat exchanger installed at the outlet of the compressor oil tank. The hot water produced by the heat recovery can be used in many areas of your plant. By directing the hot air coming out of the compressor, you can heat the room when it is needed or supply hot air to the outside using a thermostat to match seasonal changes. This saves on heating and natural gas costs. Up to 80% of the compressor’s total energy consumption can be recovered.

Inlet system

• Air circulation inside the cab with negative pressure and sealed cover design.
• Fresh air supply by exhausting hot air at a point away from the suction.
• Low noise level thanks to the inlet louvers (11 kW and above).

Air filter

• The separation efficiency of particles up to 3 microns is 99.9%.
• Low pressure loss (initial pressure drop <3 mbar).
• Easy maintenance.
• Long service life.

Air and oil separator

• Efficient separation elements ensure low oil content in the outlet air (1-3 mg/m³) to produce high quality compressed air.
• Spin-on or immersion type separator design depending on the product series.
• Easy-to-remove spin-on separator (Inversys Plus ᵖᵐ 11-22).
• Highly efficient submersible separator with a long service life (30 kW and above).

Cooling system

• Temperature-controlled axial fan (Inversys Plus ᵖᵐ 11-15).
• Optimal operating temperature thanks to inverter-controlled fans provides additional energy efficiency (18 kW and above).

Water separator

• The separation efficiency is >99% even in very hot and humid conditions.
• Compact, integrated and unique design (18 kW and above).
• High energy efficiency with minimal pressure loss (18 kW and above).

Controller

• User-friendly interface with 7-inch LED display.
• Group operation of up to 4 compressors.
• Possibility to select a Master/Slave compressor.
• Ability to connect to the customer’s DCS system via ModbusTCP.
• Compact design with built-in driver and controller.
• The weekly scheduler for starting/stopping the machine at 2 different time intervals can be individually configured for each day of the week.
• The dual PID function allows you to use PID for temperature and pressure simultaneously.
• Pressure PID ensures energy-efficient operation by maintaining the pressure at the desired level.
• The temperature PID controls the fan speed to maintain the most efficient operating temperature of the screw unit.
• All inverter and compressor control data is managed from a single location.
• Ability to determine the time of joint aging of the system with the ability to select parameters.
• Built-in phase sensor.

100% reliability with Dalgakıran

• Long service life at low rotor speeds thanks to special SmartRotor design profiles.
• High performance, compact size and low noise thanks to the IPM technology of the SmartPower motor.
• Manage the inverter and all compressor data from a single location using the Smartronic controller.
• Efficient operation with constant pressure control, providing variable speed with the SmartDrive inverter.

Delivery across Ukraine:

Courier (by our company)

Pick up yourself, or we will organize delivery throughout Ukraine.

Payment methods:

Cashless payment.