EnEn

Inversys DPR series compressors with frequency drive (0.76-62.3 m3/min)

Inversys DPR series compressors with frequency drive (0.76-62.3 m3/min)

DAKGAKIRAN INVERSYS DPR series rotary screw compressors with frequency control of shaft speed via a frequency converter are the most energy-efficient solution due to their optimal compressor performance.

Advantages of INVERSYS DPR series compressors:

  • engine with energy efficiency class IE3 (optional IE4);
  • ability to operate at ambient temperatures up to 46 °C;
  • the ability to reduce energy costs by up to 35%;
  • low noise level and minimal vibration.

Frequency converters equipped with machines of this series regulate the engine speed depending on the amount of air required for the operation of a particular equipment at a particular moment. The design of all DAKGAKIRAN INVERSYS DPR compressors complies with the European Energy Efficiency Directive (2009/125/EC).

The microprocessor-based PLC controller continuously monitors and displays the overall system status (including network pressure, variable frequency and shaft speed) with active service indications, fault alarms and emergency shutdown.

DAKGAKIRAN INVERSYS DPR series screw compressors can maintain pressure within ± 0.1 bar. The machine’s operation automatically provides a “smooth” start, which eliminates the appearance of starting currents and torques, which eliminates excessive starting load, which can negatively affect the system operation.

Thanks to a three-stage separation system, the compressed air is purified and has a maximum oil content of about 3 mg/m3. Dripping moisture is removed in a cyclone moisture separator. An inverter-controlled fan (more than 30 kW) and hot air ducts provide the required level of cooling for the system, allowing the compressor to operate at temperatures up to 46 °C.

You can rate this article:

How useful was this post?

Click on a star to rate it!

Average rating / 5. Vote count:

No votes so far! Be the first to rate this post.